The LEDH-CFK9 is an 9“ LED, Non-IC Commercial Flat Frame-in Kit and is available with multiple Trim styles. Designed for use in non-insulated ceilings, Insulation material must be kept a minimum of 3” from fixture. Available with a 14W, 23W, 30W or 45W high efficacy LED engine and universal, dimmable drivers. The special optical diffuser produces high lumen transmission and even illumination. Suitable for Wet Locations.

Galvanized steel construction. Housing adjusts for ceilings up to 1-1/4” thick.

Painted, extruded aluminum heat sink designed to facilitate efficient heat dissipation for superior thermal management and reliability. LED engine includes LED, heat sink and lens assembly. Heavy gauge aluminum reflector anodized in clear haze or white paint finishes. Multiple trim styles and finishes are available.

Universal, 120~277V input, high efficacy drivers with dimming capability by a Triac 120V low voltage electronic dimmer switches. Contact factory for 0-10V dimming availability. Drivers feature power factor >.90, THD <20% with integral thermal protection to sense over temperature or electrical issues. Driver mounts externally to the module to allow future replacement or upgrading if desired.

24” Bar Hangers provide stability and support on joists and T-Bar Grid ceilings. Housing can be positioned at any point within 24” joist spacing. Score lines allow easy “bend & snap-off” shortening for 12” joist spacing.

Listed for through branch circuit wiring. (Max.8 No 12 AWG 90°C branch circuit conductors: 4 in, 4 out). (5) 1/2” knockouts with pry-out slots and (4) knockouts with Romex cable clamps. Ground wire provided on J-box.

Emergency battery back-up : Available in mounted to fixture or remote, adjacent to luminaire (consult with factory for space requirements).

LED Module: 5 years/50K hours. Product/Driver: 3 years

cETLus Wet Location. ENERGY STAR. California Title 24