L2PCS LED Petroleum Canopy-Scottsdale Retrofit
Spec Sheet
Installation Instructions

The high performance luminaire is designed for petroleum station canopy applications where long life, low maintenance, and consistent color rendering is required. All areas with limited accessibility due to fixture location or where heavy pedestrian or vehicle traffic makes maintenance difficult are ideal applications such for this fixture.
The heavy duty housing is constructed of cast aluminum. The optical assemblies are sealed in place using a silicone gasket for weather tight protection.
A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: White. Custom colors available upon request.
Optical System
Light is directed through a clear, flat tempered glass lens providing a uniform and symmetrical light pattern.
Electrical System
Available in 5000K Cool White (+/- 150K) color temperatures propagated with Philips Lumileds LUXEON® 3030 LED’s. Minimum 80 CRI. Available with 90-300V 50/60 Hz Class II power supply. LED’s rated over 50,000 hours (TM21 Calculated L70) at 25°C ambient temperature with available 1400mA operation. Lumen Maintenance >97% at 50K hrs. 347V and 480V input options available. Standard 0-10V dimming. Driver provided with integral 4kV surge protection that meets IEEE C62.42.2-2002. Optional 10kV Surge Suppressor available (see accessories). Built-in Active PFC Function. LED Power Supply conforms to UL1310 Class 2 and UL8750 standards and is IP67 rated for wet locations.
The fixture is easily installed by one person. It may be mounted into a 12” or 16” deck pan. Nominal 1” hole deck penetration needed for new installation. Driver assembly retrofits into existing Scottsdale® ballast enclosure once existing HID ballast is removed.
ETL listed for wet locations (IP64). Meets US and Canadian safety standards. -40°C to 40°C ambient operation. RoHS Compliant.