TOTE-EM-SQUARE Modular Pole System - Square

NOTE: Fixtures and arms must be mounted to the pole before it is erected. Failure to do so may cause the pole to experience the rare, but damaging phenomenon of harmonic vibrations and fatigue. Failure to do so will void the factory warranty.

SS2P 15 4 11 Spec
SS3P 20 4 11 Spec
SS3P 24 4 11 Spec
SS4P 27 4 11 Spec
SS4P 30 4 11 Spec
Installation Instructions
Product Flyer

The Tote-Em Series are Multi-Piece Poles designed for easy installation, convenient storage, and simple handling. The pole shaft is fabricated from hot rolled carbon steel having a minimum yield of 55,000 PSI and conforms to ASTM A500 grade C requirements. The shaft construction is formed steel welded longitudinally. The multiple pole pieces interlock via a splice plug welded to the top pole section and secured into the lower section using set screws. The hand hole is located 1’ 6” above the pole base. A ground lug is provided standard.
Anchor Base
The anchor base is fabricated from a structural quality hot rolled carbon steel plate that has a minimum yield strength of 36,000 PSI. The anchor base telescopes the pole shaft and has a circumferential weld on the top and bottom.
Base Cover
A full base cover is provided which encapsulates the base plate and anchor bolts to provide a clean transition from pier to pole.
A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request.